Resin Floor Screeds

Suitable for the most demanding industrial environments, our resin floor screeds are tough and resilient to impact damage and chemical spillages.


Hard wearing, decorative and seamless flooring, suitable for heavy duty commercial areas. These screeds are a combination of clear resin and coloured quartz aggregates. This system is often found in foyers of colleges and open areas with very high foot fall.

The secret to our success with resin floor screed is thorough preparation. Without this, there can be problems with bonding and the floor can fail within just a few years. As part of our service, we can handle whatever preparation is required so you can be confident the bonding will last and you get the maximum life from the floor. This careful approach also means that even if the resin does eventually wear through in heavy use areas, you won’t have to go back to scratch. All you will need is a quick sanding to get the floor clean and a new resin surface coating layer.

MSC featues


  • Can be laid on top of solid concrete, pump screed or a range of other substrates
  • Wide choice of decorative colours and finishes
  • Also used for covings, gulleys and wall finishes
  • Easy to clean – spillages can be quickly mopped up
  • Non-dusting
  • Products to suit light or heavy use, high and low impact areas
  • Typical applications are between 6mm and 9mm thick. Where the specification is less rigorous, you might be fine with a thinner resin coating – we will advise


Resin floor screeds are available to meet a wide range of technical and decorative specifications. these include:

  • Superfast curing resin systems
  • Chemical resistant flooring
  • Anti-slip flooring
  • Decorative resin flooring

Resin Floor Screeds Estimate - Get yours today

    Unfortunately we can only provide our services to commercial premises

    Just some clients we work for:

    & hundreds of others too!

    Get a quick quote today

      Unfortunately we can only provide our services to commercial premises

      Case Study - Water World Anti-slip Resurfacing

      The tiled floor surrounding the pool at Waterworld was becoming very dated. As part of the refurbishment project the owner, Secret Millionaire Mo Chaudry wanted a surface that resembled a beach. After producing various samples the system was created.

      Owing to the tight schedule we vacuum shot blasted the surface on Sunday night and applied the DPM Epoxy Resin, The anti slip screed was installed on Monday morning. And sealed on Monday evening. The resin beach was allowed to cure all day Tuesday and was back in action on Wednesday lunchtime.

      Read more case studies
      For advice and enquiries call our customer service team 01625 668 777