Fully certified | fully insured | nationwide service | 100% guaranteed | 30 years experience
Case Study #18
UV Lines Case Study
What they needed
In almost every industrial environment there’s a need for demarcation lines to keep pedestrians and fork lift trucks apart. But sometimes a new floor can not be used for days after to allow standard resins and paints to cure and dry.
- Floor areas cannot be out of use for long periods of time.
- You cannot have cable plugged into power points and trailing across live floor isles.
- There can be no unpleasant smells from different types of resin and paint.
- Lines are often required in low temperature cold stores where normal line marking products don’t cure.
What we did
Maintenance Supplies Contracts install UV light line marking resin system. This entails the normal prep and marking out with tape but the resin cures instantly with a UV Light machine. This system is massively robust as there is a coat of primer, two coats of colour and a coat of sealer, all cured instantly with the UV light. The power is supplied buy our own gas powered generator which runs on the same gas as a fork lift truck. This way there are no trailing cables outside the moving working area. The resin has no smell and will work at temperatures down to -20. The result is a bright and strong line that is totally sealed. The surface is resilient, cleanable and strong.
Client feedback
“The process was hassle-free, on schedule, and budget-friendly, with fantastic results.”
